AUTONET TV

Motor Oil?The Synthetic Advantage (Synthetic oil vs Conventional)

You’ve probably already heard that regular oil changes are extremely important for the health of your vehicle’s engine. That’s sound advice.  But what you might not know is when it comes to motor oil, the real thing may not be the best thing for your engine.

There are different types of motor oil:
•    Conventional oil, extracted from the ground and refined.
•    Synthetic oil, manufactured from high-quality base oils and artificially-made chemical compounds.
•    Synthetic oil blend, a mixture of conventional and synthetic oils.

The first thing you need to know is that most new engines require synthetic oil.  If synthetic oil is recommended for your car – you MUST use it.

For the rest, there are many advantages to using synthetic oil over conventional oil. 

•    Synthetic oil provides better protection for your engine while helping it to perform better.
•    Conventional oil breaks down over time, while synthetic oil lasts longer.
•    Synthetics can stand higher temperature extremes, both heat, and cold.

Synthetic oil can be a better choice if you live in an extremely hot or cold climate or put a lot of strain on your engine by towing or carrying heavy loads.  It also may be good for older engines that sometimes have a tendency to develop sludge. 

Synthetic oil is a more expensive option, but you likely won’t have to have your oil changed as often.  Some synthetics are recommended to last 10,000-15,000 miles/16,000-24,000 km between changes. 

You might also consider a synthetic blend that gives you some of the advantages of synthetic oil at a lower cost. Have a talk with your service adviser about recommendations for what will best suit your vehicle and driving habits. 

It’s interesting to note that in recent years, more than one out of two vehicle owners are opting for synthetic oil or a synthetic blend when they get their oil changed. Sounds like they’re on to something. In the long run, if you have fewer oil changes with synthetics, you’ll use less oil, a bonus for our environment. 

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Why did my vehicle fail its emissions test?

We all want to breathe clean air and keep our planet green.  One of the ways to do that is by requiring all vehicles with internal combustion engines to pass an emissions test.  That’s because these vehicles can be big polluters.  

Everyone wants their car to pass the test so they can continue their day-to-day driving routine.  But then comes that one day when they tell you your vehicle has failed.  Why does that happen?

One of the most common reasons is that your gas cap is leaking or loose (or maybe you don’t even have one on your vehicle!).  The gas cap is supposed to seal in vapors, but sometimes its seals or gaskets dry out or crack. Replace it, and you’re good to go.

Another common reason your vehicle failed the test is that your catalytic converter isn’t doing its job. It is supposed to convert toxic gases from your engine into ones that don’t pollute the air.  There are many reasons the catalytic converter may not be working.  It may be physically damaged, or the steady flow of exhaust gases has fouled the converter. 

You may have a bad oxygen sensor. It’s supposed to measure how much oxygen is in your exhaust.  This can cause the air-fuel mixture to be too rich, resulting in too many hydrocarbons in the exhaust. Your ignition system may also have problems, such as worn-out spark plugs.  Dirty fuel injectors can contribute to excess emissions.

Believe it or not, a dirty engine air filter may be the culprit. If it hasn’t been replaced for a while, your vehicle may be emitting too many hydrocarbons -  something that will cause your vehicle to fail the emissions test.

You can usually avoid a failed emissions test by maintaining your vehicle regularly.  The best way to do that is by bringing it to our trained technicians, so your vehicle gets the service it needs, scheduled and non-scheduled.  Plus, you’ll be doing your part to keep our air clean.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Smooth Operator (Shocks and Struts)

Few of us ever drive somewhere without encountering some pretty rough roads, and it's amazing how well our vehicles are able to smooth out the ride. Thank your shocks and struts.

The two parts are similar.  Some cars have shocks in the rear, and struts in the front.  Others have struts all around.  A shock absorber uses a cylinder filled with gas or liquid that's connected to your vehicle's frame and axle.  When your vehicle encounters an imperfection in the road, the shock dampens the motion. 

A strut is essentially a shock absorber mounted inside a spring and can support more weight than a shock by itself.

Shocks and struts take a lot of punishment and wear out.  When they do, your tires are not contacting the road as much as they should, and that can result in a bumpy, unstable ride. Worn-out shocks and struts also transfer the impacts of road imperfections directly to your vehicle's body which can cause further damage to other parts.

You can tell when your shocks and struts are wearing out when your vehicle's ride is bouncy, you feel the bumps and body motion a lot more than you used to, or you may see fluid leaking from the areas near the wheels.

How often your shocks and struts need replacing depends on what surfaces you drive on, how far they've traveled, and how long they've been on the vehicle.  Our technicians can check the condition of your shocks and struts and advise you when they need to be changed.  Shocks and struts should always be changed in pairs.  

Because shocks and struts wear out gradually over a long time and distance, experts recommend you have them checked at least once a year.  Plus, if you know you've recently hit something especially hard in the road, you should have your suspension checked just to make sure it's ok.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994