AUTONET TV

Differential Service

When you're driving and turn a corner, you probably aren't aware of all that's going on with your wheels.  The outside wheels have a longer distance to travel than the inside wheels, so there are gears that allow the wheels to go at different speeds when you turn. 

That set of gears is called a differential.  In front-wheel drive vehicles, it's by the transmission and called a transaxle.  Rear-wheel drive vehicles have the differential, naturally, on the rear axle. Many all-wheel and four-wheel drives add a center differential since power has to go to the front and rear wheels. (Some newer vehicles power wheels with electric motors, but that's a whole different story.)

Time and distance traveled eventually can take their toll on the differential, and you may notice some noises you hadn't heard when your vehicle was newer.  Sometimes you'll hear a whir that might change in pitch when you turn.  You may hear clicking sounds when you're moving.  Others describe rumbling sounds coming from underneath during a turn. Another symptom of possible differential problems may be vibrations or shakes the faster you go. 

All of these could be signs that you have problems with a differential. One common cause of differential problems is the gears aren't getting enough lubrication.

These can all have serious effects on your driving.  You may find it hard to turn, or your wheels may lock up. That could put you or drivers around you in a dangerous position. 

It's better to take care of differential problems before they get too serious.  Bring in your vehicle so we can have a technician check yours out.  They can see if there are any differential fluid leaks or failing gaskets.  In some cases, we may recommend your differential fluid be replaced.  And if there are any mechanical issues, some components may need to be replaced as well. 

When your differential is maintained, you'll be doing your vehicle a good turn.  

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Keeping Your Cool (Water Pump Replacement)

No matter what the temperature is outside, it's important for your vehicle's engine to remain cool, calm, and collected.  Well, cool, anyway. If your vehicle has a gasoline engine, it's powered by a bunch of explosions involving spark plugs, pistons, gasoline, and air.  And the by-product of all those things working together? HEAT.

There's a whole cooling system to keep everything at a tolerable temperature for your engine's parts, and a key part of that is the water pump.  Technically, it's pumping more than water. It should actually be called the "coolant" pump since the liquid that circulates through the system is a mixture of water and coolant. 

Basically, the water pump keeps this coolant moving through your engine, where it picks up the engine heat, and then is pumped into the radiator where it gets rid of that heat.  When a water pump fails, the engine heat can build up.  When you get a warning light on the dash (either a gauge or a light) that shows the temperature is too high, it could mean a bad water pump. 

They can fail for many reasons. They have bearings in them that wear out, as does the seal between the pump and the engine. They're often driven by a belt or chain that can go bad.  Corrosion can spell the end of a water pump, too. 

If a technician determines your water pump has failed, it's time to replace it. In addition, other components of the cooling system will be inspected.  The best way to avoid a water pump failure is regular maintenance of your cooling system which includes regular draining and flushing of the coolant. 

Just like it's important for you to keep your cool, the same goes for your vehicle's engine.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Rotation Explanation (Tire Rotation Patterns)

You may notice that when you get your vehicle's oil changed, your service adviser may recommend that you have your tires rotated at the same time.  The reasons are simple.  That will allow your tires to wear more evenly and reduce the noise your tires make as you drive down the road.

There are different ways of rotating tires. If your vehicle has non-directional tires and the same size wheels at each corner, here are the different rotation patterns.

For all-wheel drive and rear-wheel drive vehicles, one is called the rearward cross pattern.  The rear tires are moved to the front and stay on the same side of the vehicle, and the front tires are moved to the rear on the side opposite of where they were on the front. 

For all-wheel and four-wheel drive vehicles, use the X pattern.  The rear tires are moved to the front on the opposite side of the vehicle, and the fronts are moved to the rear on the opposite side of where they were on the front.

For front-wheel drive, there's the forward cross.  The front tires are moved to the rear wheels on the same side of the vehicle as they were on the front and the rear tires are moved to the opposite side of the vehicle than they were on the rear. 

If you have directional tires (they only can be mounted in one direction) and the same size directional wheels, the rear tires are moved to the front on the same side of the vehicle where they were, and the front tires are moved to the rear on the same side they were on the front.   And if you have tires with different sizes of non-directional tires and wheels on the front and rear, rotation will be from one side of the vehicle to the other. 

If you have a spare, it's put into the rotation using a forward cross or rearward cross. 

Yep, that's a lot to keep straight.  So, we suggest letting your service advisor recommend the right rotation pattern for you at the interval your vehicle's manufacturer specifies.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994