AUTONET TV

The Truth about Tire Pressure (Tire Inflation)

Most light vehicles (under 10,000 pounds/4,500 kg) in North America sold from 2008 model year on have a feature that many people are confused about.  It's the tire pressure monitoring system (TPMS).  You may have some experience with it yourself if you own a newer vehicle.  Vehicles with TPMS have sensors in each tire that are supposed to warn the driver when tire pressure gets dangerously low.  That's important because tires that are significantly under-inflated can cause very serious accidents.

Unfortunately, many drivers think the TPMS does all the work keeping track of tire pressure. To them, as long as the warning light or gauge isn’t giving a warning, the tires must have the proper amount of air pressure in them.  That's not the case.

Tire pressure monitoring systems aren't all created equal.   Some give you a digital readout of the pressures in each individual tire.  But many simply have a warning light that looks like the cross section of a tire with an exclamation point in the middle.  If you don't know what it is, it's because it's not instantly recognizable as a tire.  In fact, one company that makes TPMS, Schrader Performance Sensors, surveyed drivers.  Their study showed that more than 40 percent of drivers didn't know that that warning light was. 

One out of 5 of the drivers who did know what the light was only looked at their tires after the light came on to see if they could see any that needed air; they never checked them with a tire gauge or had someone else do it.  Ten percent of them didn't do anything when the light came on.

In most vehicles with TPMS, the warning comes on only when the tires are more than 25% underinflated.  The American Automobile Association says that's under the pressure you need for safe vehicle operation.

The bottom line is once a month you should make sure your tires are inflated to the manufacturer's recommendations.  That means each tire should be measured with an accurate, external tire gauge.  To be confident you are getting a correct reading, take your vehicle to a reputable service facility where their equipment is calibrated and they know what they're doing.

Severely underinflated tires can contribute to an accident that kills or severely injures people.  The idea behind TPMS is well intended, but the system was never meant to replace regular inflation measurements and maintenance.  Periodically have your tires checked for proper inflation.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Going (Lug) Nuts (Lug Nut Replacement)

Here's a part of your vehicle you probably don't think about much: lug nuts.  They're what fasten your wheels onto your axles.  Pretty important, right? In order to take the wheels off your vehicle to service the brakes, rotate the tires, etc., the lug nuts have to be in good shape so a wrench will grip them tightly. 

Because lug nuts are on your wheels, they are exposed to all the elements of the road (salt, water, grime) and really take a beating. Unfortunately, some manufacturers have made them out of two different metals.  Underneath is the working part of the lug nut, made of steel.  On top is the decorative (the "good looking") part, made out of chrome, stainless steel or aluminum.  After a while, the steel part begins to corrode and expands.  That changes the shape of the outer cap, sometimes rounding off the hexagonal edges and making it hard (if not impossible) to either loosen or tighten the lug nuts since the wrench won't fit any more. 

The reason that's so important is those lug nuts must be functional, especially if you find you have a flat tire somewhere on the road.  If the wheel can't come off to be swapped with a spare, it leaves few options, one of which is your vehicle may have to be towed.  All that for corroded lug nuts!

When you take your vehicle in for service, the technician who works on it keeps an eye on many things, especially if he or she is removing wheels.  It's not unusual for your service advisor to recommend you replace several lug nuts at once since some corrode at a different rate than others. Your repair facility is trying to help you avoid driving a vehicle that has wheels that can't easily be taken off when they need to be.

The good news is there are one-piece lug nuts that don't have the problem the two-piece lug nuts have, so replacing them could eliminate that from happening again any time soon.  And that's not "nuts" at all.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Don't Do It Yourself (Perils of DIY Vehicle Repair)

Your vehicle is a complicated machine, and yes, it would be nice if you could take care of all of its problems yourself.  There was a time when vehicles were simpler and it wasn't too hard for a weekend mechanic to replace brakes, adjust a carburetor or perform a tune-up.  But vehicles are far more complicated these days, with traction and stability control, anti-lock brakes, air bags and fuel injection just a small sample of the new technologies. 

Like a lot of things these days, technology changes in leaps and bounds.  Anyone who repairs vehicles has to stay up on the latest computers, sensors, suspensions, steering, electronics, hydraulics and more.  Many power steering, braking and heating and air conditioning systems that used to be mechanical are now being replaced by electronic systems.  Computers are an integral part of  much of the latest automotive technology, something you didn't see a lot of until as recently as the 1990s.

Today's most highly-trained technicians are able to keep up with how to perform the latest repairs and service by continuing education about their craft.  When once an auto repairman could do fine with a lift and a good set of tools, now specialized electronic analysis equipment and tools are must-haves when it comes to vehicle repair.

Because of how fast technology changes, access to the latest repair databases and manuals is also important.  Manufacturers require certain service procedures to be performed precisely, and any other way can leave a vehicle compromised when it comes to performance and safety. 

Your vehicle is capable of traveling at high speeds on challenging surfaces with ever-increasing traffic issues and unpredictable obstacles.  You need your vehicle to be working up to its engineered potential.  That's why you should leave repairs and service to professionals.  They work on vehicles every day, and years of experience with hundreds of repairs equip them to deal with the unexpected as well as the routine. 

When you develop a trusting relationship with a reputable service facility, you can have confidence that the maintenance, service and repairs are being done by people who know what they're doing.  Your safety and your vehicle's performance and reliability are well worth it.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

How Tired Are Your Tires? (Tire replacement)

Of the things you think about most, your tires are probably pretty far down the list. That’s understandable because today’s tires are engineered to do their job without needing you to pay too much attention to them. But they DO wear out, and worn tires can contribute to skidding in bad weather, not being able to stop, a ride full of uncomfortable vibrations and, even a sudden blowout. Yikes. Let’s figure out right now how to know if your tires need replacing!

Let’s face it. Most of us don’t know the first thing about tires. So, the best way to make sure what shape yours are in is to take your vehicle to a qualified service facility to have the tires checked out by a trained technician.  Here are things they’ll check:

• Tread.  Tread is the part of the tire that touches the road surface.  Different tires have different tread patterns and something called tread blocks - the raised rubber parts that contact the road. The longer a tire has been on a vehicle, the more of that rubber wears off.  The technician will check to see if there’s enough of that tread left on your tire for sufficient traction to accelerate, steer, and brake.
• Pressure. It’s important your tires be inflated properly so your tires will perform the way they’re designed while driving.  If your tires have low air pressure, the technician will check to see why, perhaps cracks in the sidewall from age, a nail in the rubber picked up on the road, or bulges. It’s also important your tires are not overinflated too.
• Wear.  Your tires should wear evenly.  If they haven’t, the uneven wear can cause vibrations that you can feel in the steering wheel.  Maybe the whole vehicle shakes at a certain speed.  Your vehicle may require other services such as balancing, alignment, or suspension repairs to prevent future tire damage.
• Age.  Your tires may have adequate tread, but if they’re too old, it’s time for new. Rubber gets old, and when it does, it loses its elasticity.  Ever find an old rubber band and tried to stretch it? It’s brittle and will break easily. Hotter climates will age rubber—and tires—faster. All tires have their date of manufacture stamped on them, so your service adviser will be able to see when your tires were made.

If it’s time to replace your tires, you’ll find you have many choices for new ones: different brands, models, designs, etc.  Your service adviser can help you figure out which ones are right for you. It’s much better—and safer—to do it before one of them fails at the least opportune time.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994