AUTONET TV

Command Performance (Engine Air Filter)

The internal combustion engine in your vehicle counts on two things that mix together to be burned in the engine for power: fuel and air.  Both are important, of course.  If you run out of fuel, your engine won’t run at all.  Since there’s plenty of air around, you won’t run out of air, but you could feel your vehicle’s performance suffer if the engine air filter starts to get clogged. 

It's important that the air that enters your engine be free of dirt, dust, and debris to prevent damage to internal components.  That’s where the engine air filter comes in.  It prevents those particles from entering the engine, an important job that most people just take for granted.

After a while, your air filter will get dirty, which results in less air reaching the engine.  Modern fuel injected engines can adjust the amount of gas to mix with the air that is getting in, so your fuel economy won’t change significantly.  What will change is how well the engine performs, its acceleration.  In one test, a US Department of Energy study showed that a dirty air filter reduced a vehicle’s get-up-and-go by as much as 11 percent.  

The company that made your vehicle includes guidelines in your owner’s manual on how frequently that filter should be changed, and doing so will maintain your engine’s performance. If you drive in dusty, dirty areas or those with a lot of industrial pollution, we recommend you replace the engine air filter more frequently than the manufacturer’s recommendations.  

When you bring your vehicle to us for regular maintenance, we will routinely check several components, including your engine air filter, and recommend a change when we see signs it’s needed. It’s good for your engine, and you’ll enjoy the performance you expect.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Do I Need Brake Service? (Brake Service)

Think of how many times you put your foot on your vehicle’s brake pedal every day.  And think of how much you rely on your brakes to slow down and stop your momentum.  When it comes to safety systems, your brakes are at the top of the list, and that’s why it’s so important to keep them in top condition. Brakes are something you make sure you keep maintained before they start showing signs of problems.

Some of those signs are a grinding sound when you step on the brake pedal, your vehicle pulling to one side when you brake, you don’t feel your brakes stopping you as quickly as they used to, or you notice the brake light is illuminated on your instrument panel. 

We ask a lot of our brakes.  They have to work no matter how hot or cold it is outside.  That means whether it’s sunny, snowing, raining, or icy; you’re traveling at highway speeds or school-zone speeds; or when suddenly you find yourself trying to avoid hitting another vehicle, animal, person, or obstacle in the road.  They have to work on smooth or rough pavement.

When you bring your vehicle in to us for brake service, we will first inspect your brakes and all the parts in the system.  Our technician will closely check all the components for wear, deterioration, and corrosion.  We’ll check fluids, bushings, seals, and other components and make recommendations for what should be replaced or repaired to keep the system in top condition.  We’ll recommend quality parts that meet your vehicle manufacturer’s specifications. 

We want to make sure your vehicle’s brakes are doing for you what they are designed to do.  Your safety—and the safety of all the people around you—is at stake when it comes to your brakes.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Out of Joint (CV Joint and Boot Replacement)

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.  

If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The biggest problems come when one of those rubber boots cracks.  Water and dirt can then get into the joint, causing it to wear down and lose all its vital lubrication.  It’s important to have your CV joints inspected regularly so a technician can spot cracks before the CV joints are ruined.  Sometimes just the boot can be replaced before any major damage is done.  But when the joint does go bad, it must be replaced.  

Signs your CV joint needs changing out? You might hear a clicking sound when you turn if the CV joint is worn out. You might notice some thick, black grease around your wheel or on the pavement where you park your vehicle.  You might also feel your vehicle vibrate when you’re going fast.

If you suspect you might have a bad CV joint, bring your vehicle in so a technician can determine what’s going on.  Keep your CV joints in good shape and reduce the risk of them seizing up at an inopportune time so you can avoid being stranded.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Strutting Your Stuff (Shocks and Struts)

Ever wonder how your vehicle is able to move over bumps, potholes and other irregularities in the road and you hardly feel a vibration in the cabin? It’s your shocks and struts doing the hard work along with the rest of your suspension and tires.  They keep the ride smooth and are important for your vehicle’s safe operation. 

So, how do you know when your shocks and struts are wearing out? One way is to look at the surface of your tire (where the rubber meets the road—where the tread is).  You might see some little indentations in certain spots, known as tire cupping.  If your vehicle takes longer to stop than it used to, takes a dive when you hit the brake pedal or bottoms out (scrapes) on a big bump in the road, that’s another sign, as are loud, odd noises.

You may also notice your vehicle sways more than it used to. Every once in a while, look around at your shocks to see what shape things are in.  If you see the rubber cover cracked or worn out or see a fluid outside your shocks, those are signs to bring your vehicle in to us so we can see what’s going on. 

Since shocks and struts contribute to the safe operation of your vehicle, this service is important. Shocks and struts are what help your tires stay in close contact with the road and help stabilize your vehicle. They also help electronic safety systems work properly, including anti-lock braking, stability control, and collision avoidance.  Bad shocks and struts are just going to get worse with time.

It's best to have regular maintenance done before anything goes wrong with your struts and shocks.  Your vehicle’s manufacturer has guidelines for how long those intervals are.  If you do start to see some of the warning signs, head on over so we can evaluate any problems.  We’ll replace the parts your vehicle needs and have you strutting your stuff once again.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Timing is Everything (Timing Belt)

Talk about exquisite choreography; it happens under the hood of your vehicle every time you take a drive.  Your engine’s many complex parts must work exactly together.  One key is a part called a timing belt, which enables the synchronizing of two of your engine’s components, the camshaft, and the crankshaft.  

The timing belt coordinates the valves in your engine to open and close at the appropriate time to get exhaust out of the engine’s cylinders. Timing belts may also power the water pump and the oil pump.  The belt is made of rubber.  Some engines use a timing chain (made of metal). 

Your vehicle’s manufacturer recommends an interval after which you should have your timing belt or chain replaced, and that service should be part of your vehicle’s regular maintenance.  It’s always better to replace it before it breaks rather than after.  After all, if your timing belt breaks while you’re driving down the road, it throws off the whole sync of engine parts and can cause major damage to the type of engines most commonly used in vehicles today.

It's also important to remember that a timing belt is made of rubber, and rubber deteriorates with time, no matter how much use it gets. Have us look at your timing belt to see if it’s time to get it replaced.  

Here are some signs to look for that will let you know if your timing belt is failing. You might have trouble starting your vehicle, it may misfire or black smoke may come out the tailpipe. If you notice any of those symptoms, bring your vehicle in and have us take a look right away.  When it comes to your engine, timing is everything.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994