AUTONET TV

No Fountain of Youth (Aging Tires)

Can you think of anyone who enjoys aging?  Wrinkles where you don't want them, gray hair, eyes that won't focus any more, no stamina. 

Believe it or not, your tires age, too, and they don't get better the older they get.  And here's the important thing to know, even if they can still pass a tread depth test, they may simply be too old to be safe 

Here's the best way to understand this.  Have you ever found an old deck of playing cards with a rubber band wrapped around them?  Try stretching the rubber band.  SNAP! It's all cracked and brittle.  And you haven't stressed that rubber one bit since the time you put them in that drawer.

Now you know what's happening to your tires.  Rubber ages.  Just like us, the day we come into the world, we start to go downhill (no pun intended).  Oh, engineers are able to make a tire last longer than ever before.  But that gas that keeps us alive—oxygen—seems to love to chemically mix with some components in rubber.  Oxidation causes rubber to become hard and brittle.  The rubber band test.

Is there an age test that can tell you when a tire is tool old to roll? Well, not really.  They don't all age the same.  Hot climates can make tires wear out more quickly.  Some experts say a tire can last up to 10 years but should be inspected every year after the age of five.  Others say tires should have an expiration date at six years old.

Since no one would ever ask a tire its age, how do you know how old one is? Believe it or not, tires made after the year 2000 have a date code stamped on either the inside or the outside of the sidewall.  It's a four-digit numbers; the first two tell you the week, the second two tell you the year. So if it has the number 1916, it was made in the 21^st week of 2016. 

Another way to find out if your tires still have enough life in them is to have your vehicle service facility inspect them.  They look for signs of age, such as developing cracks in the rubber, the condition of the sidewalls and, of course, that old standby: tread.  If it's time to "retire" them, discuss options with your service advisor.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Steer Clear of Power Steering Problems (Power Steering Maintenance)

We usually take our vehicle's easy steering for granted until something goes wrong.  Power steering is what makes it almost effortless to turn the steering wheel, aiming your vehicle in the direction you want to go. Without the assistance of power from the engine, steering would be a laborious process, so you want to make sure the system is working well.

Power steering systems are usually one of two types, hydraulic and electric.  The hydraulic type uses a pump that is driven by either a belt or an electric motor.  This system uses hydraulic fluid to create pressure that gives your steering the power assist.  Since that pump is always working, time and distance traveled eventually take their toll, and these systems need to be periodically inspected.  Also, while that hydraulic fluid can last for years, it should be replaced periodically as it degrades over time. Your vehicle's owner's manual contains the manufacturer's recommendations.

A technician can check for leaks in the hoses, pump housing or reservoir.  Also, the belts should be inspected and so should the pump, as these can fail.  Signs of a failing pump are a groaning noise when you turn the steering wheel, stiff steering, squealing noises when you first start your car and puddles of a reddish-brown fluid under your vehicle. 

The other type is called EPS, or electric power steering, which is becoming more commonly used in the latest vehicles.  It only delivers power assist when you need it and has an electric motor that supplies that steering help.  It's more efficient, accurate, compact and clean. And because it has a lot fewer components, it's easier to maintain. 

If you have electric power steering, you may notice sometimes it's hard to turn the wheel or your Check Engine light comes on.  Sometimes the power assist motor fails or there can be problems with electrical connections.  Any time you have symptoms, it's important for your safety and that of drivers around you that you have a technician check them out.

Properly working brakes are essential for the safe operation of any vehicle.  Stop! And make sure yours are working properly.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Got it Covered! (Timing Cover Maintenance)

You may have heard at one time or another about something called a timing belt or timing chain in your engine.  And you may know that if they fail… well, let's just say that there can be some major engine damage.  So obviously, we want our timing belts and chains to be in tip-top shape.

One part that helps keep them running the way they should is the timing cover.  As you can probably guess, it's something that covers the belt or chain.  The timing cover protects both belts and chains from dirt and road debris.  Timing belts also need to be lubricated so their covers allow them to be lubricated as well.  They have a gasket that insures a good seal for the engine.  If that gasket breaks or develops a leak, then engine oil can escape, and loss of lubrication is never good for an engine component.

Other symptoms of a failed timing cover are leaking coolant, a metallic sound coming from the front of your engine or your Check Engine light coming on.  You might also notice a drop in power when you're going uphill.

It's important that your timing cover be in good condition and functioning properly.  Your repair facility will check out that part of your engine to make sure gaskets are in good shape and the cover is doing the job it's meant to do.  Catch that leaking or broken timing cover in time and your engine will thank you for avoiding some serious damage and an expensive repair.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Straight Ahead (Wheel Alignment)

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways.

Your steering wheel may not be centered when you're driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won't go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you'll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what's called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term "toe" in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer's specifications so your vehicle handles well and doesn't prematurely wear out tires.

It's a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It's not just about tire wear, it's about ride comfort and safe handling. You may say a vehicle aligned just feels divine.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

That Vexing Vapor Venting (Vapor Coming out of Vents)

You may have noticed sometimes on a hot and humid day, vapor will come out of your vehicle's vents when you have the air conditioning on.  Is that something to be concerned about? Well, it depends.

Sometimes that steam or vapor can be caused by water accumulating in the vent system after it has condensed.  And sometimes water can pool at the bottom of a vent.  When you turn on the blower mower, the air hits the water and may create steam or vapor that you can see in the cabin.

One thing to check is if that vapor smells like anything.  If it doesn't, that's a good sign. You may be able to run the fan for a while and the issue may just go away when things dry out.  But moisture collecting in the ventilation hoses in a hot vehicle may be a breeding ground for mold, and that can have health consequences.

There's another possibility. Ventilation systems often have drains to get rid of any accumulated water, and debris can sometimes clog them.  A technician can clean out those drains and you'll be back in business.

One thing to nose around for is a sweet smell coming out of your vents.  Sometimes the heater core (a component of your vehicle's heater system) can develop very tiny holes.  That sweet smell may be coolant that's been vaporized by those tiny holes entering your cabin. 

It's always a good thing to mention to your service advisor any abnormality you're seeing—or smelling—in your vehicle.  By venting a little about your vents, a technician can get to the bottom of the problem before it starts "clouding" the issue.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994