AUTONET TV

Not a Good Vibe (Driveshaft Failure)

When you feel your vehicle vibrating as you're driving down the road, one cause could be something you may not have ever seen: your driveshaft.  It is underneath the vehicle and most drivers don't climb under there to take a look very often.  The driveshaft is a cylindrical part that helps conduct the rotational power from your engine to your drive wheels.  If you have a four-wheel drive vehicle, you may have two driveshafts. 

The drive shaft has bushings, and when they wear out, that's a likely source of the vibrations.  When the bushings are in good condition, they prevent the driveshaft from vibrating.  And if you don't get your vehicle repaired fairly soon after discovering vibrations, they'll continue to get worse and cause other components of the drivetrain to wear out.

The driveshaft is, of course, only one part of the drivetrain.  It includes other parts such as axles, transmission, differentials and joints.  They all work together and need to be maintained properly.  When a driveshaft fails, there can be symptoms other than vibrations.  They include difficulty turning, rattles, clunks and squeaks coming from underneath your vehicle. You may even feel a shudder when you accelerate from a stop.

Driveshafts can fail when they get corroded or damaged by rough roads, curbs and debris. A trained technician with experience working on drivetrains uses specialized equipment that doesn't further damage the drivetrain's other parts.  Sometimes the entire driveshaft will have to be replaced; sometimes the problems can be fixed by replacing individual components. 

Your vehicle's drivetrain was engineered to propel you smoothly down the road.  When time and distance begin to take their toll, have your vehicle looked at by your service facility. They'll know how to properly pinpoint what's causing your problems and restore your vehicle to the reliable, smooth, safe machine its designers worked hard to create.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Chilly Warning (Diagnosing a Noise in Cold Vehicle)

When the weather gets colder, sometimes the noises your vehicle makes will change.  For example, you may notice a whining sound when you get going in the morning.  It may go away when the vehicle warms up, but it's best not to ignore that sound because it could be a warning of worse things to come.

Colder temperatures cause different components to behave differently.  Let's take a look at a few of them.  First, the fluids in your vehicle.  Cold temperatures can make them behave a little differently, such as engine oil, transmission fluid and power steering fluid. Those characteristics could change if the fluids are older and full of contaminants.

Belts also can create a whining noise when cold.  Since they turn pulleys that move other things, several factors can create issues.  Increased friction can change proper tensions on belts.  Plus, belts change as they age and may crack, get loose or develop a glazed surface. Belts and pulleys also must be aligned properly to work the way they're designed to.

As you can imagine, it's easier for a technician to diagnose a noise if the vehicle is making it.  And if a vehicle only makes a noise when it's cold, that sound may be gone by the time the vehicle makes it to the repair facility.  That means a driver may have to consider dropping off the vehicle the night before so the technician can be the first to start it the following morning.  Most service facilities can accommodate that with either a drop-off box or other arrangement.  Heed your vehicle's warning when you start to hear unusual noises.  That's a cool idea you should be able to easily warm up to.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

In the Hot Seat (Repair and Maintenance of Seat Heaters)

It's chilly outside. You flip on that switch that looks like a picture of a seat with little heat waves rising from it.  You expect soon you'll feel that warmth but… wait! It's not getting warmer.  Oh no, what's wrong with my seat heater? There could be lots of reasons it's not working, and it could be as simple as a fuse or as major as the heating element itself.  But it's something to leave to a pro to diagnose and repair.

Let's say it turns out to be a blown fuse.  Simply replacing the fuse may not fix it because there was a reason the fuse blew in the first place.  It's possible the on-off switch has worn out or corroded.  Perhaps the wiring connection isn't completing the circuit (could be corroded or full of dirt) or the voltage reaching the heating element isn't correct. 

There's a little sensor that keeps track of the seat heater's temperature called the thermistor.  When the seat is hot enough, it will stop the juice from heating it any more.  Sometimes those fail.  But if all of these components are healthy, you may need a new heater element. 

Those seat-heating elements are made up of wires that get sat on.  A lot.  That can put significant strain on them.  Putting something heavy on the seat can break them. Or, if you put your knees on the seat cushion as you're getting something in a rear seat, that can also damage the element.  Sometimes they can be repaired but often they have to be replaced.  And here is where the technician's expertise comes into play.  That heater element is attached to the seat's fabric and replacing it can be tricky.  It also can require disassembling a lot of the seat to access it. 

Seat heaters are a wonderful feature and they make your vehicle oh, so much cozier.  So keep them working and enjoy the warmth!

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

A Squirrely Problem (Animals Nesting in Engine)

If you park your vehicle outside, you are exposing it to all sorts of critters that would love to use it for nesting, food storage and shelter.  There are plenty of pictures online of people who've discovered there was more than an engine under the hood.  In one case, the driver of an SUV started to smell a slight burning odor when she was driving.  Turned out to be 200 walnuts and a lot of grass had been stored there by some industrious squirrels preparing for the upcoming cold weather. 

The SUV owners had their vehicle inspected not long before this happened, but it doesn't take some animals long to set up house in what they think is the ideal spot to make their winter home.   Obviously, that can create problems.  Squirrels, mice, rats and other small animals can chew through hoses and wires.  Plus what they store as food and nesting material may prevent engine parts from moving the way they are supposed to.  Imagine a radiator fan that won't turn because it's laden with heavy walnuts.  Or the fire hazard created by flammable brush on a hot manifold.

Probably the best solution is to store your vehicle inside a rodent-tight building, but that's no guarantee.  Unfortunately it doesn't take a very big hole or gap for small mice or other creatures to get in.  Some careful sealing with materials like cement or steel wool can reduce rodent access effectively, but they're always looking for access so you can't let down your guard.

If you're not able to store your vehicle inside, you may try spraying lavender or mint essence around the engine or in the wheel wells.  Rodents don't seem to like those odors very much.  If you drive your vehicle every day, you're less likely to have unwanted residents than if you leave it sit for days.  In either case, if you have experienced animal problems in the past, open your hood and inspect your engine frequently. 

Check with your service adviser for recommendations on how to keep animals out of your vehicle.  You're not the only one whose vehicle looks like the perfect winter apartment to some critters.  Preventing animals from getting to your vehicle is worth some time and expense because damage from gnawing teeth can be very costly and difficult to repair.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

The Puzzling Puddle (Leaks Under Vehicle)

Ever notice a little spot of liquid under your vehicle after you've parked in your driveway or garage? It may have been something as simple as water left from air conditioning condensation.  But then again, it could be a sign that there's trouble brewing in one of your vehicle's systems.

You can help your service facility diagnose the problem by getting a little sample of the drip.  At the same time, you may save yourself a tougher clean up task by preventing the leaky fluid from really messing up the driveway or garage floor.  The first thing is to put something under the vehicle. A flattened out cardboard box will do fine.  You may also want to slip a little disposable aluminum tray or pan under it to catch a bit of the fluid.  Chroma and consistency can help a technician quickly figure out what kind of fluid you're dealing with.  You can take your sample with you when you go to your service facility.

Also note how much of the substance is there over what period of time, when you started to notice it and its location relative to the vehicle.  Is it on the passenger's or driver's side? Front, middle or back? Vehicle's have different designs, so where their equipment is located will depend on make and model. 

The leaky fluid will have a certain look to it and consistency.  If it's blue, it may be windshield washer fluid and a sign that your washer fluid tank has a leak.  If it's green, it could be antifreeze.  Orange may mean rusty water or transmission fluid.  Brown? Might be oil.

There should be no leaks in your powertrain if things are maintained properly.  A small leak may not seem like a big deal, but sometimes they can get much bigger quickly.  A coolant leak, for example, may suddenly go from pinhole to flood, draining your cooling system and putting your engine in danger of overheating. 

It is a really good idea to have a professional check out your leaks as soon as you notice them.  And the more clues you can provide, the happier the technician will be as the search for the problem gets underway.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994