AUTONET TV

What's in a Number? (What Tire Numbers Mean)

You've probably never paid much attention to the writing on the sides of your tires, but they contain a wealth of information.  There's a long combination of letters and numbers that can tell you a whole lot about what tires your vehicle was designed to be riding on.  Let's check out this example found on an SUV: P245/70R17 108T.

The first letter, P, means it's intended for passenger vehicles.  If there's no letter, it means it's a metric tire.  If there's an LT at the beginning or end that means a tire designed for light trucks.

Moving on to our example, the 245 shows how wide the tire is in millimeters from sidewall to sidewall.  The number that follows in our example, 70, means the height of the tire is 70% of its width.  The letter after that in our example, R, describes the type of tire (on this vehicle, radial).  Following that is the diameter in inches, in our SUV example, 17 inches. 

How much load the tires' sidewalls are designed to take is what that next number is all about (108 in our example).  The higher the load index, the more weight the sidewalls can take.  And the last letter is the speed rating of the tire, in our example, T.  The further along in the alphabet that letter is, the higher its speed rating.  So now you know what those letters and numbers mean.  But why are they important?

When you are getting ready to replace those tires, those numbers are telling you what the original equipment was when your vehicle was new.  Sticking with the same rated tires is always a good idea.  If you don't know what you're doing, trying different sized tires and wheels can cause real issues when it comes to performance and safety, considering all the computerized systems now found on vehicles.  When in doubt, consult your service advisor when it comes to buying new tires.  He or she knows what those tire numbers and letters mean… and a whole lot more.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

A Turn for the Worse (Using Turn Signals)

Distracted driving is bad, you know that.  Daydreaming, talking on the cell phone, putting your makeup on in the rear view mirror.  All bad.  But there's something else that causes more than twice as many accidents, according to a recent study.  And that's people who don't use their turn signals. 

Maybe you're one of them.  One survey said nearly a quarter of drivers were just too lazy to use their turn signals.  Others said they didn't use them because they weren't really necessary.  Traffic laws may dictate otherwise, but statistics show police don't write that many tickets for turn signal violations. 

You may have encountered the driver who cuts into your lane without signaling a change.  Often, that person does it deliberately to catch you off guard so you won't invade his or her space.  And when it comes to young drivers using turn signals, one insurance company survey showed more than two-thirds of those they talked to admitted it wasn't their regular practice.

Knowing that, you may wonder why you should use your turn signal.  The reason is simple.  It lets other drivers know what you plan to do.  Driving it tricky enough with all the moving parts on the road.  The more you know what other people are doing, the more you can prepare for that with the way you drive.

How many times have you seen someone turn left without putting their turn signal on?  That's a leading cause of rear-end accidents. Not only does using your turn signal promote safety, it also shows courtesy to other drivers.

There are some drivers who don't use turn signals because their turn signals don't work.  What a lousy excuse! All of the safety equipment in your vehicle should be working; if it isn't, head over to your repair facility.  Often it's as simple as a burned out bulb or a broken wire. 

Finally, the number one reported reason for not using a turn signal is that drivers just forget to do it.  (And the ones who DO use their turn signals and forget they're on?  We won't even go there.)

Engineers put turn signals on vehicles for a reason.  They help drivers communicate with other drivers.  Using them could save accidents… and lives.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

That Squeal is Telling You Something (What Causes Squealing While Steering)

If you hear a squealing noise when you turn your vehicle, it's trying to tell you something is wrong.  After all, it never made that noise before, right?  The sound  you hear may becoming from a few sources.  Let's take a look (or a listen) to some of the possibilities.

First, you almost certainly have power steering in your vehicle. Without power steering, you practically have to have arms like Arnold Schwarzenegger to turn, so automakers have technology to assist your steering, either mechanically or electrically.  For a long time, the most common power steering has been hydraulic, using a belt to supply power from the engine that turns a power steering pump full of a fluid that helps you steer. 

Sometimes that fluid gets low because of a leak or some other problem.  The belt could wear out and start squeaking, and you might feel the steering start to become harder.  Your service repair facility can figure out the problem and offer some solutions.

Another cause could be in your suspension.  Some components may not be getting lubricated like they should.  Or you may be hearing your tires squealing when you are turning. 

Properly working steering is a huge safety factor for your vehicle's operation.  Your steering affects handling, vital to your well-being as well as that of drivers around you.  So take your vehicle over to your repair facility and have it checked out.  You'll be doing everyone on the road—including yourself—a big favor by listening to your vehicle. When it comes to steering, silence really is golden.  Get that squealing repaired and get back to safe driving.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Winter Watch List (Winter Maintenance Items)

Don't love winter weather? Here's a list of four things you need to keep a watch on during the winter months.

Let's start with coolant levels.  Coolant is as important in cold weather as it is in hot weather.  Think of the term "anti-freeze." Your coolant needs to be adjusted for climate and temperature so the coolant doesn't freeze when the vehicle isn't running. Your service facility will know the right mixture.

Next, windshield wiper fluid. Winter weather can be challenging when it comes to visibility, so it's important to have the correct windshield washer fluid.  Some of it is specially formulated for ice and freezing temperatures. And it won't freeze if your vehicle has to sit out in below-freezing temperatures.  And don't forget you can get winter wiper blades that stay clearer in snowy, icy weather than ordinary blades.

Don't forget your tire pressure and tread.  After all, tires are what connect your vehicle and the road.  As temperatures go down, so does the air pressure inside your tires, so it's important to keep that up to the manufacturer's recommended pressure.  Also, make sure your tires have enough tread so they can grip slippery roads. Any service facility can perform a simple test so you'll know. If you need some new tires, they can help you find those that will fit your driving patterns.

Finally, oil gets thicker when the temperatures go down, so it's important to have the proper viscosity for your climate.  Consult your service advisor who will make sure your vehicle is using what the manufacturer recommends.

Keep your vehicle prepared for winter weather and it will reward you with the safety and performance it's designed for.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994