AUTONET TV

A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now?

Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick.

There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You have to be careful doing that, though, because sometimes you can damage the transmission.  You can try working the parking brake control a few times to see if that will loosen the corrosion.  If you can't unstick it, you can try driving slowly a short distance to a repair facility near you.  Sometimes it won't cause damage to the brakes but it depends on how tightly the parking brake was applied and what was stuck.  You may also have to have your vehicle towed to a repair facility.

In any case, once you've seen these symptoms, have your vehicle brakes looked at by a professional who can fix the root of the problem.  Better yet, don't let your vehicle get in this condition; regular maintenance and inspections by a trained technician should prevent you from getting in a jam somewhere thanks to a stuck parking brake.  You could use a "brake" like that.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Don't Miss a Beat (Importance of Regular Maintenance)

In many places, license plates have to be renewed every year or else you can't drive your vehicle legally.  Usually, you'll get a reminder from the agency that issues the plates.

That kind of regular attention needs to be paid to your vehicle as well.  Its manufacturer has determined a schedule of service items that need to be done regularly, just like renewing your plates.

Some depend on time, others depend on distance.  A perfect example is oil changes.  It's the most important scheduled maintenance you can have done to give your engine its longest life possible.  The manufacturer recommends the oil filter be changed at the same time.

Here are some more items.  Your engine air filter gets dirty and needs adequate air to run most efficiently.  The manufacturer recommends an interval for replacing that.  Also tires, brake pads, timing belt, oxygen sensor and other items require regular replacement. 

This is one of the reasons to find a service facility that you like and keep going there.  Many will keep records of what's been done to your vehicle and send you reminders of when it's time to schedule service items.  Some do it by mail, others by email.  Still others might text you or give you a phone call.  Remember, they base those reminders on the vehicle manufacturer's recommendations. 

We all have a lot going on in our lives, so these reminders can help you avoid missing important service items that are important to your vehicle's durability and safety.  So if you move or change phone numbers or email addresses, make sure your vehicle service facility gets the word.  Otherwise you won't get the reminders and your service advisor will wonder what's happened to you!

At the same time, you might want to let your vehicle manufacturer know when you've changed your address, phone number or email address.  If there is a safety recall or your manufacturer is offering an extended warranty on some of your vehicle's systems, they'll need to reach you.   

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Something to Latch On To (Hood Latch Safety)

The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid.  But when he pulled the hood release inside the car, nothing happened. 

Usually, opening any hood is a 2-step process.  You pull the hood release (which is usually a handle under the dashboard to the left of the steering column) and listen for the hood to pop up slightly. (It doesn't open all the way because it has a safety latch to prevent you from accidentally opening it up while you're driving.) Then, you get out and find the latch, usually through the grille near the hood.  There's a little handle on it which you push, slide or pull (there are a few different types) at which point the hood can be opened up all the way. 

But in this driver's case, the hood would not release at all when he pulled the handle inside.  Not knowing what to do, he called his service advisor, who told him to bring it over.  The reason? A hood with a broken latch could be a safety hazard since it is possible it's not securely closed. And in this condition, it's possible for the hood to suddenly release while you are driving, obscuring your view of the road. 

Latch issues can be caused by many things, perhaps a broken cable between the hood release and the latch.  It's possible that cable just detached or frayed after being opened so many times.  If a hood release cable isn't kept lubricated, it can corrode and just lock up.

In this driver's case, the cable had corroded and broken, so it had to be replaced.  Unfortunately, many times you won't know you have a problem with your hood latch until one time you pull it and it breaks without warning.  When your vehicle is in for routine maintenance like an oil change, a technician will often keep an eye out for signs that your hood latch needs attention so you don't get "locked" out of your engine compartment.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Tire or Re-Tire? (Getting Tires Ready for Hot Weather)

Heat isn't easy on vehicle tires, and as the seasons change, make sure yours are ready to take the heat. 

Let's talk first about inflation.  Heat causes air to expand, so heat alone can raise the pressure in your tires.  If you are driving on overinflated tires, they won't have as much contact with the road surface.  In that case, it will take you a longer distance to stop.

On the other hand, you don't want your tires to be underinflated during hot weather, either.  That can cause your sidewalls to flex.  Friction will then hike up the temperature and your tire can be in danger of blowing from the added heat.

Other things can cause problems, such as uneven wearing.  Your service advisor knows the signs to look for and can diagnose where the wear is and what is likely causing it.  Another thing a technician will look for on tires is tread depth and the condition of the sidewalls.  Any cuts, cracks or bulges could be indications that your tire is not healthy. 

Oh, and one other thing.  Your tires could have plenty of tread left on them but still be dangerous.  And that is because rubber ages, gets brittle and cracks after time.  (Ever run across an old rubber band in a drawer that has never been used but breaks the second you try to stretch it? 'Nuff said.) Some tire manufacturers recommend replacing tires after 6 years of their manufacturing date.  Your service advisor can read a manufacturing code and tell you how old your tires are. 

Tire manufacturer Michelin used to have an ad slogan that said, "Because so much is riding on your tires." That includes you and your passengers.  Always keep healthy tires on your vehicle and make sure they're ready for whatever season it is.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

The Sign of the Shield (Heat Shield Repair and Replacement)

Even in the months where temperatures are cooler, heat is still an enemy of your vehicle.  When your engine runs, it creates heat, so there are numerous heat shields that protect other parts from those higher temperatures. Heat shields are installed around several areas of the exhaust system.  Others prevent heat from reaching parts of the vehicle.  Still others prevent heat from reaching the ground (or maybe grass underneath) and starting a fire. 

If you remember your space travel history, you'll know how important a heat shield can be. John Glenn was the first American to orbit the earth, but during that maiden orbital flight, a sensor on board was indicating the heat shield on his capsule, Friendship 7, was loose.  If it had come off, his spacecraft could have burned up upon re-entry.  Fortunately, the heat shield stayed on, and Glenn made history.

Unfortunately, the heat shields on your vehicle don't have warning systems like the space vehicles did.  So you have to maintain them.  Heat shields are constantly exposed to elements like water, salt, sand and dirt.  That makes them prone to rusting and corroding.  Here's one unfortunate fact: Materials that make them good at preventing heat transmission also are soft and vulnerable, often aluminum or special fabric. 

One sign a heat shield will give you that it's loose is noise; you'll sometimes hear it rattling underneath your vehicle when it's running. One way to locate it? Put your vehicle in park, leave the engine running and take a listen outside.  It's usually pretty easy to pinpoint the location.

Make a note of the noise when you are talking with your service advisor. It's important to have those heat shields working correctly so the heat is kept away from your other vehicle systems and combustibles on the ground. The good news is that heat shields can frequently be inexpensively repaired or re-attached.  In other cases, they should be replaced. 

Missing or loose heat shields? Let's just say they're not cool.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994